Description
Front Shifter Bushing
The popular COBB Subaru 6-Speed Front Shifter Bushing is a direct replacement the soft rubber bushing found at the anchor point of your shifter assembly. This upgraded bushing greatly improves the feel of the shifter by eliminating side-to-side compliance (slop) found in the stock shifter mechanism caused by soft rubber bushings. This bushing is made from 95A durometer urethane and comes with everything needed for an easy installation with simple hand tools. Made in the USA.
Rear Shifter Bushing
The popular COBB Subaru Rear Shifter Bushing is the final piece of the puzzle to eliminating excessive shifter compliance in the factory setup. The Rear Shifter Bushing is a direct replacement for the soft rubber bushing found at the back of the shifter assembly. This upgraded bushing greatly improves the feel of the shifter by reducing side-to-side and front-to-back compliance (slop) found in the stock shifter mechanism caused by soft rubber bushings. This bushing is made from 85A durometer urethane and comes with everything needed for an easy installation with simple hand tools. Works on both 5-speed and 6-speed Subaru manual transmissions.
The COBB Rear Shifter Bushing bolts to the chassis using two bolts that are angled inward, making installation a breeze. Other solutions utilizing straight-through holes can be prone to difficult installation and risk cross-threading of bolts.
Subaru 6MT Shifter Bushing Pack
- 95A Durometer Front Bushings
- 85A Durometer Rear Shifter Stay Bushing
- Eliminate Front-to-Back & Side-to-Side Slop in Stock Shifter
- Improves the Feel of the Shifter
- Direct Replacement
