Description
NO TUNING REQUIRED
Increase horsepower and torque without ECU recalibration or tune! This part is designed and tested to work safely on your vehicle without any tuning required! However, more power can be gained with proper ECU tuning! Confirm any tune or recalibration you add is specific for ALL modifications added to the vehicle.
PLUG-N-PLAY CRANK CASE VENT CONNECTOR
The PERRIN Turbo Inlet Hose is the only turbo inlet hose on the market to include an OEM-like connector that does not require defeating the emission control device.
SMOOTH NYLON COUPLER
Other turbo inlet hoses included a metal connector to join the turbo inlet hose with the intake. The PERRIN design has been further improved with the use of a glass filled reinforced nylon coupler, allowing for an even smoother transition from intake to turbo inlet hose while also maintaining rigidity and strength.
SMOOTHER AIRFLOW TO TURBO
The PERRIN Turbo Inlet Hose is perfectly smooth on the inside and has a significantly larger internal diameter than the OEM part. The increased airflow by removing the pleats found in the OEM hose makes more horsepower, decreases turbo spool time, and improves acceleration.
SS INTERNAL SUPPORT WIRE
The PERRIN Turbo Inlet Hose is reinforced with a stainless steel support wire that is embedded within the silicone layers. The support adds rigidity to the hose and prevents collapse when used with restrictive filter elements and large turbo applications running extreme amounts of boost. The OEM part has a tendency to wear down and tear over time. The wire reinforced silicone in the PERRIN Inlet Hose is much more durable.
BLOW OFF VALVE CONNECTION
The PERRIN Turbo Inlet Hose has a machined aluminum insert which is bonded into the layers of silicone, giving you a solid blow off valve hose connection and makes installation go even easier.
LARGE HIGH-FLOW SPIGOTS
All spigots on the PERRIN Turbo Inlet Hose are 1/2″ID for maximum flow from crank case vents and other vacuum connections. All connectors used on our hoses are glass reinforced nylon (rated to 400 degrees F) which will withstand engine bay temps found from normal driving to extreme racing conditions.
Included
(1) PERRIN Inlet Hose
(1) Nylon Coupler
(1) Diagnosis Connector
(1) 15″ Vacuum hose
(1) 48 Clamp
(1) 36 Clamp
(1) 6 Clamp
(2) 1/2″-1/2″ 90 Degree connector
(2) 1/2″-3/8″ 90 Degree connector
(1) PERRIN License Plate Frame
Warranty & Instructions
